The compound is designed for protection against wear and restoring repair of hydraulic steering wheel boosters without disassembling. The gel forms a new cermet coating on friction surfaces. As a result a renovated unit exceeds the performance level of a new one and will serve you 2-4 times loeristics
General characteristics of the cermet layer:
Microhardness – 750 kg/mm2;
high corrosion resistance;
roughness Ra up to 0,06 mkm.
Recommendations of mechanics:
Hydraulic steering wheel booster in “Volga” car usually makes hissing. This noise can mar the pleasure while driving though the manufacturers concede the “hissing” of a hydraulic steering wheel booster under loads at low speed and do not consider it as a defect. XADO revitalizant can rectify this damage!
Application:
Add the gel-revitalizant into the steering pump reservoir. Check the operating oil level.
After adding the gel-revitalizant turn the steering wheel for 5-10 minutes.
Revitalization is considered to be finished after 50 hours of mechanism operation (1500 km/930 miles run).
Dosage:
1-2 Oil system volume | 1 tube | one time
2-5 Oil system volume | 2 tubes | one time
5-8 Oil system volume | 3 tubes | one time
Note.
The sure sign of revitalizing beginning is the improvement in steering gear operation (steering wheel force augmentation, operation accuracy, noise reduction) as early as the first kilometers of run.
If after 100-200 km run mechanism operation improvement does not occur, the most probable cause is a mistaken diagnostics.
